Skip to content
Products-Dispense Copy

Take the Headache Out of Material Dispensing

Products-Dispense Copy

Material dispensing with ease.

Robot27’s Dispense is part of our growing lineup of precision material dispensing end effectors for robots.

Three models enable the pneumatic dispensing of adhesives, lubricants, solvents and more. Each model comes with everything you need to quickly and easily set up your robot for dispensing. Simply load a material cartridge onto the end effector, connect the air supply, and start your robot program.

From simple, tabletop adhesive applications to complex dispensing routines requiring motion in 6 axes, Dispense by Robot27 offers cost-effective, redeployable, safe, and precise options for your business. Don’t see a model that suits your needs? No problem! Robot27’s team of engineers is ready to customize a solution that works right for you.

Call us to learn more
(855) 762-6827

Products-Dispense Copy

Syringe

The Syringe model is designed for single-part syringes from 3 to 55 cc/mL.  Its size and tip are ideal for applications requiring small dots or beads utilizing low to medium viscosity materials.  Vacuum retraction minimizes contamination from dripping.

Products-Dispense Copy

Cartridge

When larger volumes of material need to be dispensed, Cartridge is the right product for you.  The Cartridge model makes dispensing from 300mL cartridges a snap.

Products-Dispense Copy

Two Part Cartridge

Need to dispense two-part materials?  No problem with the Two Part Cartridge model!  The dual-rod actuation system is designed for 50ml cartridges and can dispense ratios of 1:1, 2:1, and 4:1.

Details – Syringe

Cartridge Type/Size
3-55 cc/mL

Payload (w/o cartridge)
0.15 kg

Ideal to Dispense
Cyanoacrylates
UV cures
Conformal coatings
Conductive adhesives

Details – Cartridge

Cartridge Type/Size
300 mL

Payload (w/o cartridge)
1.0 kg

Ideal to Dispense
RTVs
Silicones
Sealants
Anaerobics
Pre-mixed epoxies

Details – Two Part Cartridge

Cartridge Type/Size
50 mL

Payload (w/o cartridge)
0.8 kg

Ideal to Dispense
Epoxies
Silicones
Sealants

Watch the introductory videos

Robot27 Dispense Overview 2:17

Robot27 Dispense Demo 04:25

Dispense Syringe Kit Demo

Products-Dispense Copy

Download the Product Info Sheet
[sdm_download id=”2420″ fancy=”0″]

Download the Technical Data Sheet
[sdm_download id=”2425″ fancy=”0″]

Products-Dispense Copy

How Does it Work?

Start dispensing quickly by:

  • Mounting the end effector to the robot
  • Mounting the air pressure control components nearby
  • Making the necessary air and electrical connections
  • Installing the software on your robot
Products-Dispense Copy
Products-Dispense Copy

Features and Benefits

Our product kits include everything you need to get started. In just a few hours, you can put your new material dispenser to work.

Fast to setup: Mount the end effector with the included hardware. All wiring is pre-labeled for easy installation. Just hook up the system and start dispensing.

Easy to program: No prior programming experience is required. Dispensing is controlled right from the UR teach pendant with easy-to-use controls.

Versatile: Redeploy the system over and over again for short runs or long-term projects.

Adjustable: Dispensing pressure is controlled programmatically from the robot’s software interface. Adjust from 10 to 85 psi with one command without messing with manual regulators.

Retraction ready: Minimize the mess with built-in vacuum-powered retraction..

Additional Information

Robot Compatibility: Universal Robots CB3 3.11.0+, e-Series 5.5.1+ (other brands in development)
Incoming Air Supply: 85 psi clean, dry air
Electrical: 24v from Robot Controller
Ideal Viscosity: Low-Medium
Dispense Pressure: 10-85 psi

Interested in a Dispense system?