Skip to content
Waypoint Newsletter – Issue 6

Issue Number 6

January, 2021

Featured Article

Take the Headache Out of Material Dispensing

Robot27’s Dispense is part of our growing lineup of precision material dispensing end effectors for robots.

Three models enable the pneumatic dispensing of adhesives, lubricants, solvents and more. Each model comes with everything you need to quickly and easily set up your robot for dispensing. Simply load a material cartridge onto the end effector, connect the air supply, and start your robot program.

From simple, tabletop adhesive applications to complex dispensing routines requiring motion in 6 axes, Dispense by Robot27 offers cost-effective, redeployable, safe, and precise options for your business. Don’t see a model that suits your needs? No problem! Robot27’s team of engineers is ready to customize a solution that works right for you.

Waypoint Newsletter – Issue 6

Download the Sales Sheet

Download the Technical Data Sheet

Waypoint Newsletter – Issue 6

Three models for almost any application.

Waypoint Newsletter – Issue 6

Syringe

Dispense Syringe is designed for single-part syringes from 3 to 55 cc/mL.  Its size and tip are ideal for applications requiring small dots or beads utilizing low to medium viscosity materials.  Vacuum retraction minimizes contamination from dripping.

Waypoint Newsletter – Issue 6

Single Cartridge

Dispense Single Cartridge makes dispensing from 300mL cartridges a snap.  When larger volumes of material need to be dispensed, Single Cartridge is the right product for you.

Waypoint Newsletter – Issue 6

Dual Cartridge

Need to dispense two-part materials?  No problem with Dispense Dual Cartridge!  The dual-rod actuation system is designed for 50ml – 1,500ml cartridges and can dispense ratios of 1:1, 2:1, and 4:1.

Waypoint Newsletter – Issue 6

How Does it Work?

Start dispensing quickly by:

  • Mounting the end effector to the robot
  • Mounting the air pressure control components nearby
  • Making the necessary air and electrical connections
  • Installing the software on your robot
Waypoint Newsletter – Issue 6
Waypoint Newsletter – Issue 6

Features and Benefits

Our product kits include everything you need to get started. In just a few hours, you can put your new material dispenser to work.

Fast to setup: Mount the end effector with the included hardware. All wiring is pre-labeled for easy installation. Just hook up the system and start dispensing.

Easy to program: No prior programming experience is required. Dispensing is controlled right from the UR teach pendant with easy-to-use controls.

Versatile: Redeploy the system over and over again for short runs or long-term projects.

Adjustable: Dispensing pressure is controlled programmatically from the robot’s software interface. Adjust from 10 to 85 psi with one command without messing with manual regulators.

Retraction ready: Minimize the mess with built-in vacuum-powered retraction..

Interested in a Dispense system?

Waypoint Newsletter – Issue 6

Call us about material dispensing automation.

Our experts would love to help.